Description

ADITYA SILICONE RUBBER RTV – 1010

With Curing Agent

Product Description

ADITYA SILICONE RUBBER RTV – 1010 is a Tin Cure Silicone Rubber supplied in two parts:

Part A: Silicone Rubber

Part B: Curing Agent

The Curing Agent is mixed into the Silicone Rubber in the recommended ratio. It cures at room temperature to produce a flexible, durable silicone mould.

Once cured, the mould can be used for casting Plaster, Polyester Resin, Epoxy Resin, Polyurethane, Wax, and other compatible casting materials.

Special Features

Specially created for making moulds of Murties, Statues, Crafts, POP Cornices, Candles, Medallions, and items with deep undercuts.

Recommended for items up to 9 inches in height.

Low viscosity allows the silicone to flow around every detail of the master pattern.

Low hardness makes demoulding easy, even for intricate designs.

This silicone can be converted into a brushable paste by adding Aditya Brushing Agent 999, allowing it to be applied on vertical surfaces with a brush.

Applications

Small murties (up to 9 inches in height).

Statues.

POP Cornices.

Candles.

Medallions.

Resin items.

Other similar mould making applications.

Technical Properties

Hardness (Shore A) After Cure: 10

Viscosity: 10,000 cps

Curing Agent / Hardener Ratio: 2.5% to 3%

Working Time: Approximately 8–10 minutes

Curing Time: 12–24 hours

Colour: Milky

Packing

Available in 1 Kg and 20 Kg packs with the corresponding quantity of curing agent included.